## Complex Adaptive System Design (Part 5)

When we design a complex system, we often start with a rough outline and fill in details later, one piece at a time. And if the system is supposed to be adaptive, these details may need to changed as the system is actually being used!

The use of operads should make this easier. One reason is that an operad typically has more than one algebra.

Remember from Part 3: an operad has operations, which are abstract ways of sticking things together. An algebra makes these operations concrete: it specifies some sets of actual things, and how the operations in the operad get implemented as actual ways to stick these things together.

So, an operad $O$ can have one algebra in which things are described in a bare-bones, simplified way, and another algebra in which things are described in more detail. Indeed it will typically have many algebras, corresponding to many levels of detail, but let’s just think about two for a minute.

When we have a ‘less detailed’ algebra $A$ and a ‘more detailed’ algebra $A',$ they will typically be related by a map

$f : A' \to A$

which ‘forgets the extra details’. This map should be a ‘homomorphism’ of algebras, but I’ll postpone the definition of that concept.

What we often want to do, when designing a system, is not forget extra detail, but rather add extra detail to some rough specification. There is not always a systematic way to do this. If there is, then we may have a homomorphism

$g : A \to A'$

going back the other way. This is wonderful, because it lets us automate the process of filling in the details. But we can’t always count on being able to do this—especially not if we want an optimal or even acceptable result. So, often we may have to start with an element of $A$ and search for elements of $A'$ that are mapped to it by $f : A' \to A.$

Let me give some examples. I’ll take the operad that I described last time, and describe some of its algebras, and homomorphisms between these.

I’ll start with an algebra that has very little detail: its elements will be simple graphs. As the name suggests, these are among the simplest possible ways of thinking about networks. They just look like this:

Then I’ll give an algebra with more detail, where the vertices of our simple graphs are points in the plane. There’s nothing special about the plane: we could replace the plane by any other set, and get another algebra of our operad. For example, we could use the set of points on the surface of the Caribbean Sea, the blue stuff in the rectangle here:

That’s what we might use in a search and rescue operation. The points could represent boats, and the edges could represent communication channels.

Then I’ll give an algebra with even more detail, where two points connected by an edge can’t be too far apart. This would be good for range-limited communication channels.

Then I’ll give an algebra with still more detail, where the locations of the points are functions of time. Now our boats are moving around!

Okay, here we go.

The operad from last time was called $O_G.$ Here $G$ is the network model of simple graphs. The best way to picture an operation of $O_G$ is as a way of sticking together a list of simple graphs to get a new simple graph.

For example, an operation

$f \in O_G(3,4,2;9)$

is a way of sticking together a simple graph with 3 vertices, one with 4 vertices and one with 2 vertices to get one with 9 vertices. Here’s a picture of such an operation:

Note that this operation is itself a simple graph. An operation in $O_G(3,4,2;9)$ is just a simple graph with 9 vertices, where we have labelled the vertices from 1 to 9.

This operad comes with a very obvious algebra $A$ where the operations do just what I suggested. In this algebra, an element of $A(t)$ is a simple graph with $t$ vertices, listed in order. Here $t$ is any natural number, which I’m calling ‘t’ for ‘type’.

We also need to say how the operations in $O_G$ act on these sets $A(t).$ If we take simple graphs in $A(3), A(4),$ and $A(2)$:

we can use our operation $f$ to stick them together and get this:

But we can also make up a more interesting algebra of $O_G.$ Let’s call this algebra $A'.$ We’ll let an element of $A'(t)$ be a simple graph with $t$ vertices, listed in order, which are points in the plane.

My previous pictures can be reused to show how operations in $O_G$ act on this new algebra $A'.$ The only difference is that now we tread the vertices literally as points in the plane! Before you should have been imagining them as abstract points not living anywhere; now they have locations.

Now let’s make up an even more detailed algebra $A''.$

What if our communication channels are ‘range-limited’? For example, what if two boats can’t communicate if they are more than 100 kilometers apart?

Then we can let an element of $A''(t)$ be a simple graph with $t$ vertices in the plane such that no two vertices connected by an edge have distance > 100.

Now the operations of our operad $O_G$ act in a more interesting way. If we have an operation, and we apply it to elements of our algebra, it ‘tries’ to put in new edges as it did before, but it ‘fails’ for any edge that would have length > 100. In other words, we just leave out any edges that would be too long.

It took me a while to figure this out. At first I thought the result of the operation would need to be undefined whenever we tried to create an edge that violated the length constraint. But in fact it acts in a perfectly well-defined way: we just don’t put in edges that would be too long!

This is good. This means that if you tell two boats to set up a communication channel, and they’re too far apart, you don’t get the ‘blue screen of death’: your setup doesn’t crash and burn. Instead, you just get a polite warning—‘communication channel not established’—and you can proceed.

The nontrivial part is to check that if we do this, we really get an algebra of our operad! There are some laws that must hold in any algebra. But since I haven’t yet described those laws, I won’t check them here. You’ll have to wait for our paper to come out.

Let’s do one more algebra today. For lack of creativity I’ll call it $A'''.$ Now an element of $A'''(t)$ is a time-dependent graph in the plane with $t$ vertices, listed in order. Namely, the positions of the vertices depend on time, and the presence or absence of an edge between two vertices can also depend on time. Furthermore, let’s impose the requirement that any two vertices can only connected by an edge at times when their distance is ≤ 100.

When I say ‘functions of time’ here, what ‘time’? We can model time by some interval $[T_1, T_2].$ But if you don’t like that, you can change it.

This algebra $A'''$ works more or less like $A''.$ The operations of $O_G$ try to create edges, but these edges only ‘take’ at times when the vertices they connect have distance ≤ 100.

There’s something here you might not like. Our operations can only try to create edges ‘for all times’… and succeed at times when the vertices are close enough. We can’t try to set up a communication channel for a limited amount of time.

But fear not: this is just a limitation in our chosen network model, ‘simple graphs’. With a fancier network model, we’d get a fancier operad, with fancier operations. Right now I’m trying to keep the operad simple (pun not intended), and show you a variety of different algebras.

And you might expect, we have algebra homomorphisms going from more detailed algebras to less detailed ones:

$f_T : A''' \to A'', \quad h : A' \to A$

The homomorphism $h$ takes a simple graph in the plane and forgets the location of its vertices. The homomorphism $f_T$ depends on a choice of time $T \in [T_1, T_2].$ For any time $T,$ it takes a time-dependent graph in the plane and evaluates it at that time, getting a graph in the plane (which obeys the distance constraints, since the time-dependent graph obeyed those constraints at any time).

We do not have a homomorphism $g: A'' \to A'$ that takes a simple graph in the plane obeying our distance constraints and forgets about those constraints. There’s a map $g$ sending elements of $A''$ to elements of $A'$ in this way. But it’s not an algebra homomorphism! The problem is that first trying to connect two graphs with an edge and then applying $g$ may give a different result than first applying $g$ and then connecting two graphs with an edge.

In short: a single operad has many algebras, which we can use to describe our desired system at different levels of detail. Algebra homomorphisms relate these different levels of detail.

Next time I’ll look at some more interesting algebras of the same operad. For example, there’s one that describes a system of interacting mobile agents, which move around in some specific way, determined by their location and the locations of the agents they’re communicating with.

Even this is just the tip of the iceberg—that is, still a rather low level of detail. We can also introduce stochasticity (that is, randomness). And to go even further, we could switch to a more sophisticated operad, based on a fancier ‘network model’.

But not today.

Some posts in this series:

Part 1. CASCADE: the Complex Adaptive System Composition and Design Environment.

Part 2. Metron’s software for system design.

Part 3. Operads: the basic idea.

Part 4. Network operads: an easy example.

Part 5. Algebras of network operads: some easy examples.

Part 6. Network models.

Part 7. Step-by-step compositional design and tasking using commitment networks.

Part 8. Compositional tasking using category-valued network models.

Part 9 – Network models from Petri nets with catalysts.

### 3 Responses to Complex Adaptive System Design (Part 5)

1. domenico says:

It is an interesting theory, that reminds me the cluster expansion (in this case of the operads).
If it happen a phase transition, where the numbers of edges (less of 100 kilometers) is large enough to allow long-range communication and rescue (I am thinking that little perturbation of the ships configuration give the same statistical phase), then the rescue would be probable: if a statistical description could be possible, then the number of the rescue boat could be adapted to the number of ships, and some lives could be saved.

2. sn0wleopard says:

I found it interesting that both your network operation $f$ as well as the argument networks $x$, $y$ and $z$ can be expressed algebraically as follows:

$f = 1*2 + 3*6$

$x = 1 + 2*3$

$y = 4*5 + 5*6 + 6*7$

$z = 8*9$

Here $+$ and $*$ are so-called ‘overlay’ and ‘connect’ operations that are defined on simple networks as:

$(V_1, E_1) + (V_2, E_2) = (V_1 \cup V_2, E_1 \cup E_2)$

$(V_1, E_1) * (V_2, E_2) = (V_1 \cup V_2, E_1 \cup E_2 \cup V_1 \times V_2)$

The application of the operation $f$ to the arguments is then simply $f + x + y + z$, which gives you the right result.

Not sure how useful this observation is! :)

P.S.: The above ‘overlay’ and ‘connect’ operations have a simple equational theory: https://github.com/snowleopard/alga-paper/releases/download/final/algebraic-graphs.pdf

3. I’m running a special session on applied category theory, and now the program is available:

Applied category theory, Fall Western Sectional Meeting of the AMS, 4-5 November 2017, U.C. Riverside.

This is going to be fun.

My former student Brendan Fong is now working with David Spivak at MIT, and they’re both coming. My collaborator John Foley at Metron is also coming: we’re working on the CASCADE project for designing networked systems.

This site uses Akismet to reduce spam. Learn how your comment data is processed.